Access Point ZyXEL NWA5123-AC HD

NWA5123-AC HD Specifications

RF Specifications

802.11n/ac premium features

• 802.11n: 2x2 MIMO with two spatial stream (SU-MIMO)
• 802.11ac: 3x3 MIMO with three spatial stream (SU-, or MU-MIMO)
• 802.11ac beamforming (transmit beamforming)
• Maximal ratio combining (MRC)
• Low End Sensitivity Improvements (LESI)
• Time Domain Channel Smoothing
• 20-, 40- and 80-MHz channels
• PHY data rates total up to 300 Mbps (11n) + 1300 Mbps (11ac)
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
• Cyclic Delay diversity (CSD) support
• Maximum Likelihood Demodulation (MLD) support
• Low Density Parity Check (LDPC) support

Typical transmit output power (dBm)1

• US (FCC) 2.4 GHz:25 dBm
• US (FCC) 5 G GHz:28 dBm
• EU (ETSI) 2.4 GHz:20 dBm
• EU (ETSI) 5 G GHz:26 dBm

Antenna gain

• 2.4 GHz:3 dBi; 2x2 MIMO
• 5 GHz:3 dBi 3x3 MIMO

Support data rate

• 802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11n: up to 300 Mbps in MCS15 (40MHz; 2 Spatial Streams; GI=400ns)
• 802.11ac:up to 1300 Mbps in MCS9 (80MHz; 3 Spatial Streams; GI=400ns)

Receive sensitivity

Min. Rx sensitivity up to -103 dBm

Interfaces

Number of 10/100/1000M LAN

2 x switch ports

Console port

4-Pin serial

Input power requirements

Direct DC power or Power over Ethernet (PoE)2

PoE

802.3at (full mode)
802.3af (Restrict 2.4G & 5G radio to one transmit stream only.)

PoE power draw

15.5 W (802.3at PoE)

WLAN

WLAN maximum throughput

Up to 1600 Mbps

Fast roaming

Pre-authentication and PMK caching

Wireless Security

• WPA/WPA2-PSK
• WPA/WPA2-Enterprise
• WLAN access control list
• EAP type
• IEEE 802.1X
• MAC filtering
• Web authentication3
• Layer-2 isolation
• RADIUS authentication
• Microsoft AD authentication3
• LDAP authentication3
• MAC authentication3
• Rogue AP detection

Number of SSID

16

QoS

• WMM
• WMM power save
• U-APSD
• DiffServ marking

Network

IPv6 support

Yes

VLANs

Yes

DHCP client

Yes

Management

ZON Utility4

• Discovery of Zyxel switches, APs and gateways
• Centralized and batch configurations
  • IP configuration
  • IP renew
  • Device factory reset
  • Device reboot
  • Device locating
  • Web GUI access
  • Firmware upgrade
  • Password configuration
  • One-click quick association with Zyxel AP Configurator (ZAC)

Smart Connect

• Neighbor device discovery
• One-click remote management access to the neighboring Zyxel devices

Zyxel AP Configurator5

• Batch AP configuration
• Batch AP firmware upgrade
• Batch AP profile backup

Zyxel Wireless Optimizer6

• Wi-Fi AP planning
• Wi-Fi coverage detection
• Wireless health management

Standalone AP mode

Yes

Managed AP mode

Yes

CLI

Yes

SNMP

v2c/v3

Standard Compliance

Ethernet

• IEEE 802.3
• IEEE 802.3u
• IEEE 802.11ab
• IEEE 802.3au
• IEEE 802.3az
• IEEE 802.3af/at

PoE

IEEE 802.3af/at

WLAN

• 802.11b: DBPSK, DQPSK, CCK
• 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM

Certifications

Radio

• FCC Part 15C
• FCC Part 15E
• ETSI EN 300 328
• EN 301 893
• LP0002
• EN 60601-1-2

EMC

• FCC Part 15B
• EN 301 489-1
• EN 301 489-17
• EN55032
• EN55024
• EN61000-3-2/-3
• BSMI CNS13438

Safety

• EN 60950-1
• IEC 60950-1
• BSMI CNS14336-1

Physical Specifications and others

Item

Dimensions (mm/in.)

211 x 223 x 39 / 8.31 x 8.78 x 1.54

Weight (kg/lb.)

750/1.653

Packing

Dimensions (WxDxH)

251 x 247 x 55 / 9.88 x 9.72 x 2.17

Weight (kg/lb.)

990/2.182

Included accessories

Wall/ceiling mount plate

Plenum rating

Yes

Kensington lock support

Yes

Power supply

Input

AC 100-240V, 50~60Hz

Output

DC +12V 2A (Sold separately)

MTBF (hr)

4,134,738

Environmental Specifications

Operating

Temperature

-20°C to 60°C / -4°F to 140°F

Humidity

10% to 90% (Non-condensing)

Storage

Temperature

-40°C to 70°C / -40°F to 158°F

Humidity

10% to 90% (non-condensing)