QNAP TS-253D
|
TS 253D-4G |
|
|
CPU |
Intel® Celeron® J4125 quad-core 2.0 GHz processor (burst up to 2.7 GHz) |
|
CPU Architecture |
64-bit x86 |
|
Graphic Processors |
Intel® HD Graphics 600 |
|
Floating Point Unit |
|
|
Encryption Engine |
(AES-NI) |
|
Hardware-accelerated Transcoding |
|
|
System Memory |
4 GB SO-DIMM DDR4 (1 x 4 GB) |
|
Maximum Memory |
8 GB (2 x 4GB) |
|
Memory Slot |
2 x SO-DIMM DDR4 |
|
For dual-DIMM configuration, you must use a pair of identical DDR4 modules. |
|
|
Flash Memory |
4GB (Dual boot OS protection) |
|
Drive Bay |
2 x 3.5-inch SATA 6Gb/s, 3Gb/s |
|
The system is shipped without HDD. |
|
|
For the HDD compatibility list, please visithttps://www.qnap.com/compatibility/ |
|
|
Drive Compatibility |
3.5-inch SATA hard disk drives |
|
2.5-inch SATA hard disk drives |
|
|
2.5-inch SATA solid state drives |
|
|
Hot-swappable |
|
|
M.2 SSD Slot |
Optional via a PCIe adapter |
|
SSD Cache Acceleration Support |
|
|
2.5 Gigabit Ethernet Port (2.5G/1G/100M) |
2 (also support 10M) |
|
5 Gigabit Ethernet Port (5G/2.5G/1G/100M) |
Optional via PCIe expansion card |
|
10 Gigabit Ethernet Port |
Optional via PCIe expansion card |
|
Optional via PCIe expansion card |
|
|
Wake on LAN (WOL) |
Only the 2.5GbE port |
|
Jumbo Frame |
|
|
PCIe Slot |
1 |
|
Slot 1: PCIe Gen 2 x4 |
|
|
PCIe bandwidth limitations will restrict the NAS 10GbE performance. |
|
|
USB 2.0 port |
3 |
|
USB 3.2 Gen 1 port |
2 |
|
USB 3.2 Gen 2 (10Gbps) Port |
Optional via a PCIe expansion card |
|
IR Sensor |
(Optional QNAP RM-IR004 remote control) |
|
HDMI Output |
1, HDMI 2.0 (up to 4096 x 2160 @ 60Hz) |
|
Form Factor |
Tower |
|
LED Indicators |
Power/Status, LAN, USB, HDD1-2 |
|
Buttons |
Power, USB copy, Reset |
|
Dimensions (HxWxD) |
168 × 105 × 226 mm |
|
Weight (Net) |
1.55 kg |
|
Weight (Gross) |
2.68 kg |
|
Operating temperature |
0 - 40 °C (32°F - 104°F) |
|
Storage Temperature |
-20 - 70°C (-4°F - 158°F) |
|
Relative Humidity |
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
|
Power Supply Unit |
65W adapter, 100-240V |
|
Power Consumption: HDD Sleep Mode |
8.198 W |
|
Power Consumption: Operating Mode, Typical |
12.448 W |
|
Tested with drives fully populated. |
|
|
Fan |
1 x 70mm, 12VDC |
|
Sound Level |
17.1 db(A) |
|
System Warning |
Buzzer |
|
Kensington Security Slot |
