Switch Aruba 2530 8G PoE+ (J9774A)

Aruba 2530 8G PoE+ Switch (J9774A, J9774ACM1)

I/O ports and slots

8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX;

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3

Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers)

Additional ports and

slots

1 dual-personality (RJ-45 or USB micro-B) serial console port

Physical

characteristics

Dimensions

10.00(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm) (1U height)

Weight

2.2 lb (1 kg)

Memory and processor

Processor

ARM9E @ 800 MHz, 128 MB flash; Packet buffer size: 1.5 MB dynamically allocated, 256 MB DDR3 DIMM

Mounting and

enclosure

Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting

Performance

IPv6 Ready Certified

100 Mb Latency

< 7.4µs (LIFO 64-byte packets)

1000 Mb Latency

< 2.6 µs (LIFO 64-byte packets)

Throughput

up to 14.8 Mpps (64-byte packets)

Switching capacity

20 Gbps

MAC address table size

16000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

15% to 95% @ 104°F (40°C), non-condensing

Non-operating/ Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/

Storage relative humidity

15% to 90% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 0 dB, Pressure: 0 dB

Electrical characteristics

Frequency

50/60 Hz

Maximum heat

dissipation

65 BTU/hr (68.58 kJ/hr), (switch only: 65 BTU/hr; combined switch + max. PoE devices: 293 BTU/hr)

Voltage

100 - 127 / 200 - 240 VAC, rated

Current

1.4 A

Maximum power rating

86 W

Idle power

13.4 W

PoE power

67 W

Notes:

• Idle power is the actual power consumption of the device with no ports connected.
• Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
• PoE power is the total power budget available to all PoE ports.

Safety

UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1

Emissions

FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Immunity

Generic

EN 55024, CISPR 24

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2